If you are a subcontractor on a government-funded construction project, you will almost always be asked for certified payroll. Many subcontractors find this paperwork confusing, and mistakes can delay your payments or even cost you future work. This guide explains subcontractor certified payroll (also called certified payroll for subcontractors) in simple English: what it is, when you need it, how to prepare it and how to avoid the most common problems.
What Is Subcontractor Certified Payroll?
Certified payroll is a weekly report that shows how much each worker on a public project was paid. It lists each worker’s job classification, hours, pay rate, fringe benefits, deductions and net pay. The report ends with a signed Statement of Compliance that confirms workers were paid at least the prevailing wage.
Certified payroll for subcontractors works the same way as it does for prime contractors. The big difference is who you send it to. Subcontractors usually send their reports to the prime contractor (or the next contractor above them), and the prime submits everything to the government agency.
For more background, read our guide to what certified payroll is.
When Do You Need Subcontractor Certified Payroll?
You need certified payroll for subcontractors when your company performs work on:
- Federal construction contracts over $2,000 covered by the Davis-Bacon Act
- Federally funded projects, such as highways, bridges, airports, water and sewer systems, schools and affordable housing that use federal money
- State and local public works projects in states with prevailing wage laws, such as California, New York, Illinois, New Jersey, Washington and many more
- Some private projects that receive public funding, grants or tax incentives with prevailing wage conditions
The requirement applies to every tier. If you are a second-tier or third-tier subcontractor, you still need to submit certified payroll for your workers.
Why Subcontractor Certified Payroll Matters So Much
Under federal rules, the prime contractor is responsible for making sure every subcontractor follows prevailing wage rules. That means primes are very strict about collecting reports. If your certified payroll is missing or wrong:
- The prime may hold your payment until reports are fixed
- The agency may withhold money from the whole contract
- You may owe back wages and fringe benefits to your workers
- The prime may remove you from future bid lists
- Serious violations can lead to debarment from federal work for up to three years
On the positive side, subcontractors who send clean, on-time reports quickly become trusted partners for primes that bid public work.
What Goes on a Certified Payroll Report
Every certified payroll report for subcontractors should include:
| Section | What to include |
|---|---|
| Contractor details | Your company name, address and whether you are a prime or subcontractor |
| Project details | Project name, location and contract or project number |
| Payroll number and week ending | A report number for each week and the week-ending date |
| Worker information | Name and an identifying number, often the last 4 digits of the SSN |
| Classification | The job classification from the wage determination for the work done |
| Hours | Hours worked each day and the weekly total, with overtime shown separately |
| Rates | Base hourly rate and overtime rate |
| Fringe benefits | Amount paid in cash and amount paid to benefit plans |
| Pay details | Gross wages for the project, total gross wages, deductions and net pay |
| Statement of Compliance | Signed by an owner, officer or authorized person |
On federal projects, subcontractors often use the Department of Labor’s Form WH-347 or an equivalent report with the same information.

Step-by-Step: How to Prepare Subcontractor Certified Payroll
Step 1: Get the Wage Determination
Ask the prime contractor for the project’s wage determination before you start work. It lists the base rate and fringe benefits for each classification in that county. Read it carefully so you know which classifications your crew will fall under.
Step 2: Get the Reporting Instructions
Ask the prime how they want reports submitted. Many primes use online compliance systems such as LCPtracker or similar platforms. Others want PDF reports by email each week. Ask about deadlines, required attachments and who to contact with questions.
Step 3: Set Up Your Payroll
Set up project-specific pay rates in your payroll system for each classification. Workers must be paid at least the prevailing wage for hours on the public project, even if they earn less on your private jobs.
Step 4: Track Hours by Day, Project and Classification
Your timecards must show hours worked each day, on which project, and in which classification. If a worker does two types of work, track the hours separately or pay the higher rate for all hours.
Step 5: Pay Fringe Benefits
Pay the required fringe benefits in cash, through approved benefit plans, or a mix of both. Keep proof of plan payments.
Step 6: Run Payroll and Prepare the Report
Run payroll as normal. Then prepare the certified payroll report using the same numbers. The report must match the actual paychecks exactly.
Step 7: Review, Sign and Submit
Check the report for math errors and correct classifications. Sign the Statement of Compliance and submit it to the prime contractor by the deadline, usually within seven days after payday.
Step 8: Keep Records
Keep copies of every report, timecard and fringe payment record for at least three years after the project ends, or longer if your state requires it.
Certified Payroll for Subcontractors: Common Mistakes
- Not asking for the wage determination before starting work. You cannot pay correctly without it.
- Using company rates instead of prevailing wages. Every hour on the public project must meet the wage determination.
- Leaving out fringe benefits. Fringes are part of the required pay, not a bonus.
- Wrong classifications. A worker must be classified by the work performed. Laborers cannot do electrician work at the laborer rate.
- Unregistered apprentices. Apprentices can only be paid apprentice rates if they are registered in an approved program and the ratio is followed.
- Skipping weeks. If your crew did not work on the project in a week, the prime may still need a “no work” report.
- Reports that do not match paychecks. Agencies compare certified payroll with payroll records during audits.
- Missing signatures. An unsigned Statement of Compliance makes the report incomplete.
Read how to avoid certified payroll penalties for more detail.
Example: A Small Electrical Subcontractor
Imagine a small electrical subcontractor with three workers on a federally funded school renovation. The wage determination lists:
| Classification | Base rate | Fringe |
|---|---|---|
| Electrician | $42.00 | $18.00 |
| Electrician apprentice (registered, 50%) | $21.00 | Per apprenticeship program |
| Laborer | $26.00 | $12.00 |
During one week, the two electricians work 40 hours each on the school, and the laborer works 32 hours. The subcontractor must pay at least $42.00 plus $18.00 in fringe for each electrician hour and $26.00 plus $12.00 for each laborer hour. If the company only provides $8.00 per hour in benefits through its health plan, it must pay the remaining fringe in cash on each paycheck.
At the end of the week, the subcontractor prepares one certified payroll report that lists all three workers, their daily hours, rates, fringes, gross pay, deductions and net pay, signs it and uploads it to the prime’s compliance system.
Certified Payroll for Subcontractors on State Projects
State prevailing wage projects often have their own rules on top of the federal ones. For example:
- California requires contractors and subcontractors to register with the Department of Industrial Relations and submit electronic certified payroll records online
- New York uses prevailing wage schedules from the state Department of Labor, and New York City has its own schedules and systems
- Illinois, Washington and New Jersey each have their own online systems or forms
Always check the contract and ask the prime which system to use. For California projects, see our guide to prevailing wage in California.
How Primes Review Subcontractor Certified Payroll
Knowing what the prime checks can help you get approved the first time. Most primes review:
- Whether every worker who was on site appears on the report
- Whether classifications match the work shown on daily logs
- Whether base rates and fringes meet the wage determination
- Whether overtime was paid correctly
- Whether apprentice ratios and registrations are valid
- Whether the math adds up and the report is signed
Some primes also compare your reports to site sign-in sheets or badge records. Accurate time tracking makes these reviews painless.
Tools That Make Subcontractor Certified Payroll Easier
You can prepare certified payroll by hand, but it takes a lot of time and is easy to get wrong. Helpful tools include:
- Construction payroll software that supports multiple rates and prevailing wage tables
- Mobile time tracking with job and classification selection
- Automatic WH-347 or state report generation from payroll data
- Fringe benefit tracking, including cash-in-lieu calculations
- Document storage for wage determinations, apprentice certificates and signed reports
Or you can simply outsource certified payroll for subcontractors to a team that does it every week, so your office can focus on running jobs and certified payroll for subcontractors never falls behind.
Certified Payroll for Subcontractors Checklist
Before the job
- Get the wage determination and reporting instructions from the prime
- Register with any required state or online systems
- Set up project rates and classifications in payroll
- Confirm apprentice registrations and ratios
Every week
- Track daily hours by classification
- Pay prevailing wages and fringes
- Prepare, review and sign the certified payroll report
- Submit on time and save a copy
At closeout
- Confirm every week has a report on file
- Answer any prime or agency questions
- Store all records for at least three years
Certified Payroll for Subcontractors: Fringe Benefits Explained
Fringe benefits are where most subcontractor certified payroll mistakes happen. The wage determination lists a fringe amount per hour for each classification. You can meet it in three ways:
| Method | How it works | Example for an $18.00 fringe |
|---|---|---|
| Plan contributions | Pay into bona fide plans like health insurance or a retirement plan | $18.00 per hour paid to approved plans |
| Cash in lieu | Add the fringe amount to the worker’s hourly pay | $18.00 per hour added to the paycheck |
| Combination | Part plan, part cash | $10.00 to plans plus $8.00 in cash |
When you pay fringe in cash, it is taxable wages, so payroll taxes apply. When you pay into plans, the credit is usually annualized across all hours the worker works in the year. Getting this right is a core part of certified payroll for subcontractors, and it is the first thing auditors check.
Certified Payroll for Subcontractors Who Also Do Private Work
Most subcontractors split their crews between private jobs and public jobs. This is normal, but it adds complexity to certified payroll for subcontractors:
- Track hours by project every day. Only hours on the public project go on its certified payroll report.
- Use separate pay rates. Workers must get the prevailing wage for public project hours, even if their normal rate is lower.
- Calculate overtime on the full week. Overtime is based on all hours worked in the week, including private and public jobs.
- Show total gross pay. The WH-347 shows both gross pay for the project and gross pay for all work that week.
- Check fringe annualization. Benefit credits must reflect all hours worked, not just public hours.
A payroll system that tracks rates by job makes this simple. Spreadsheets make it painful.
Certified Payroll for Subcontractors: Apprentices and Trainees
Apprentices can help subcontractors control labor costs on public projects, but only when the rules are followed. To pay an apprentice less than the journeyworker rate on certified payroll for subcontractors:
- The apprentice must be registered in a program approved by the Department of Labor’s Office of Apprenticeship or a recognized state apprenticeship agency
- The apprentice must be paid the percentage of the journeyworker rate shown in the program for their level
- Fringe benefits must be paid as required by the program or wage determination
- The ratio of apprentices to journeyworkers on the job site must not exceed the program’s allowed ratio
If any of these conditions are not met, the worker must be paid the full journeyworker rate. Keep a copy of each apprentice’s registration certificate with your project records.
Costs of Getting Certified Payroll for Subcontractors Wrong
A single mistake on certified payroll for subcontractors can be expensive. Imagine an electrician who should have received $60.00 per hour in wages and fringes but was paid only $48.00 per hour for 400 hours on a project. The underpayment is $12.00 × 400 = $4,800 for just one worker. Multiply that by several workers and add interest, penalties and legal fees, and a small mistake can wipe out the profit on the entire job.
That is why investing in accurate certified payroll for subcontractors is cheaper than fixing problems after an audit.
Questions to Ask the Prime Before You Start
Before your crew steps on site, ask the prime contractor these questions about certified payroll for subcontractors:
- Which wage determination and modification apply to this project?
- How and where should we submit certified payroll each week?
- What is the weekly deadline?
- Do you need “no work” reports for weeks we are not on site?
- What other documents do you need, such as fringe benefit statements, apprentice certificates or W-9s?
- Who should we contact with compliance questions?
Getting these answers in writing at the start prevents most certified payroll for subcontractors problems and payment delays later.
How Payroll Construction Services Helps Subcontractors
At Payroll Construction Services, we prepare certified payroll for subcontractors on federal and state projects every week. We set up wage determinations, track classifications and fringe benefits, calculate overtime, run payroll and deliver ready-to-sign reports in the format your prime needs, including online compliance systems.
Learn more about our construction payroll services, read about certified payroll requirements, or contact us for a free consultation. Official federal guidance is on the U.S. Department of Labor Davis-Bacon page.
Frequently Asked Questions
Do subcontractors have to submit certified payroll?
Yes. Certified payroll requirements apply to every subcontractor tier on covered public projects. Subcontractors usually submit reports to the prime contractor, who sends them to the agency.
How often do subcontractors submit certified payroll?
Usually every week that work is performed on the project, within seven days after the regular payday. Some primes also require “no work” reports for weeks with no activity.
What form do subcontractors use for certified payroll?
On federal projects, subcontractors often use the Department of Labor’s WH-347 or an equivalent report. State projects may require a state form or an online system.
Can a subcontractor’s certified payroll problems affect the prime contractor?
Yes. The prime contractor is responsible for subcontractor compliance and can be held liable for unpaid wages. That is why primes review subcontractor certified payroll carefully.
What happens if a subcontractor submits certified payroll late?
The prime may hold the subcontractor’s payment, and the agency may withhold money from the contract until all reports are received and correct.
Can subcontractors outsource certified payroll?
Yes. Many subcontractors outsource certified payroll to a construction payroll provider that prepares reports from payroll data every week.
Final Thoughts
Subcontractor certified payroll does not have to be stressful. Get the wage determination early, track hours by classification, pay the right wages and fringes, and send accurate reports every week. Do that consistently and you will get paid faster, pass audits easily and become the subcontractor primes want on every public job.
